Chroma19073 安规测试仪 耐压测试仪
安规测试仪19073Chroma系列产地台湾,是著名的安规测试仪生产厂家CHROMA生产。号称是体积很小的的综合安规测试仪在这个世界上,小型机型设计更能为工程师节省桌面的位置,携带也非常地便携,LCD屏幕DISPLAY没有死角,观察结果一眼就可以看到,看清楚。适用于电子零件之安规测试,为精致型耐压测试器。Chroma19073是一台可以实现自动化耐压/绝缘 测试仪器 ,方便电机行业和电子设备行业做自动的耐压漏电电流与绝缘电阻测试而设计的高质量设备。在耐......
产品描述
安规测试仪19073Chroma系列产地台湾,是著名的安规测试仪生产厂家CHROMA生产。号称是体积很小的的综合安规测试仪在这个世界上,小型机型设计更能为工程师节省桌面的位置,携带也非常地便携,LCD屏幕DISPLAY没有死角,观察结果一眼就可以看到,看清楚。适用于电子零件之安规测试,为精致型耐压测试器。Chroma19073是一台可以实现自动化耐压/绝缘测试仪器,方便电机行业和电子设备行业做自动的耐压漏电电流与绝缘电阻测试而设计的高质量设备。在耐压测试方面,Chroma19073安规测试仪的输出功率为AC︰100VA(5kV,20mA),DC︰30VA(6kV,5mA),因此可用来做为电子、电机方面等设备的耐压或绝缘测试仪,亦可对零件产品做同样的测试。安规测试仪是专门测量接地电阻之量测仪器,电阻量测范围由0.1~510mΩ,操作简单、体积轻巧,适用于生产线之接地量测,可提供高可靠度及稳定的测试结果,并具内建式电阻补偿功能,是一台经济、实用的接地测试器。

Chroma19073主要特点
体积很小的综合耐压测试器
交/直流耐压、绝缘电阻测试三合一机型(19073)
开 / 短路侦测功能(OSC)
电气闪络侦测功能 (Flashover)
具0.4ms快速切断及0.2sec快速放电
提供可靠及稳定的测试结果
可记忆 10 个测试步骤及60组记忆功能
人体保护功能(GFI)
型号 描述
19071 耐压测试器 (AC)
19073 耐压测试器 (AC/DC/IR)
A190701 远端控制盒
A190702 40kV高压测试棒
A190704 启动开关
A190706 19" 机框耳架
A190708 ARC(Flashover)验证治具
A190344 高压枪(SP02)
文章来源于安规测试仪
| 银飞有售Chroma19073 | Chroma 19073 交直流耐压绝缘测试仪 主要技术参数 |
| Model | 19572 |
| Mode | Ground Bond |
| Grounding Resistance Test | |
| Output Current | AC : 3 ~ 45A |
| Load Regulation | 1 % + 0.3 A |
| Resolution | 3 ~ 30A, 0.01A / 30.1 ~ 45A, 0.1A |
| Current Accuracy | ±(1.5% of setting + 0.5% of full scale) |
| Output Frequency | 50Hz / 60Hz |
| Resistance Range | 0.1 ~ 510 mΩ |
| Resistance Resolution | (R display counts/ I display counts)≧0.2, Resolution: 1mΩ(R display counts/ I display counts) < 0.2, Resolution: 0.1mΩ |
| Resistance Accuracy | ±(2% of reading + 0.5% of full scale) |
| Offset | A predetermined value can be subtracted from the measured value and the result of subtraction can be display |
| The result of subtraction can be compared with a Good/NO Good judgment reference value, and the result of comparison can be use for the Good/NO Good judgment | |
| Offset Range | 0 ~ 100mΩ |
| TestTime | 0.5 ~ 999 sec., continue |
| Waveform | Sine wave |
| GO/NG Judgment | A no-good judgment is made when a resistance greater than the high limit value Is detected. |
| A no-good judgment is made when the output current is cutout and a no-good Alarm signal is delivered. Ifno abnormal state is detected during the test time, a good judgment is made and a good signal is deliver. | |
| Limit | Hi-Limit : 0.1 ~ 510mΩ; Low-Limit : off, 0.1mΩ~ Hi-Limit Value, 510mΩmax. |
| General | |
| Operation Environment | Temperature: 0℃~ 40℃, Humidity :≦80 % RH |
| Power Consumption | No load(Ready state) :<100 W, Withrated load :≦880W max. |
| Power Requirement | 100V / 120V / 220V (AC±10%) / 240V (AC -10% ~ +5%), 50 / 60 Hz |
| Dimension (H x W x D) | 105 x 320 x 400 mm / 4.13 x 12.60 x 15.75 inch |
| Weight | 16 kg / 35.24 lbs |
| Certification | UL, CE |



